60W 12V / 24V Constant Current LED Driver LED Dimmer
- Jan 03, 2018 -

Basic Info

Product Description

  • Model NO.: MT-12060

  • Warranty: 2 Years

  • Input Voltage: Full Range

  • Certification: CE, RoHS

  • Specification: Size: 145*47*25(mm)(L*W*H)

  • HS Code: 85044019

  • Output Type: Single

  • Output Power: 51 - 100W

  • Connection Mode: Series Switching Power Supply

  • Transport Package: 365*315*185 mm / 50PCS / 14kg

  • Origin: Guangdong, China

60W 12v / 24v led controller constant current led driver

 ?  Material case : aluminum 
 ?  Protections:Short circuit / Overload / Over temperature 
 ?  Cooling by free air convection
 ?  IP67 design for indoor or outdoor installations
 ?  100% full load burn-in test
 ?  Suitable for LED lighting and LED screen ,etc.
 ?  Products through CE& RoHS certification
 ?  2 years warranty
 ?  Suitable for dry,wet and rain environment.


OutputDc Voltage12V24V 
Rated Current5A2.5A 
Current Range0~5A0~2.5A 
Rated Power60W60W 
Voltage Tolerance±4%±2% 
Setup,Rise Time100ms/220VAC
Hold Up Time(Typ.)80ms/220VAC
InputVoltage Range90~250VAC
Frequency Range47~60Hz
Power Factor(Typ)PF>0.6/220VAC
Ac Current(Typ) 0.55A/235V 
Inrush Current(Typ)Cold-start current 5A/235V
ProtectionShort CircuitProtection type:recovers automatically after fault conditions is removed
OverlaodOverload protection@145~160%above peak rating
Over Temperatureprotection typer:shut down o/p voltage.re-power on to recover
EnvironmentWorking Temp-30~ +60oC(Refer to output load derating curve)
Working Humidity20~90%RH no-condensing (Waterproof)
Storage Temp Humidity-40~ +80oC,10~90%RH
Safety&EmcSafety StandardsCE Mark(LVD),IP67
Withstand VoltageI/P-O/P:1.5KVAC   IP-GND:1.5KVAC
Emc Test StandardsEN 55015:2006; EN 61547:1995+A1:2000 ;EN 61000-3-2:2006; EN61000-3-2:1995+A2:2005
EN 61347-1:2008 EN 61347-2-13:2006
NOTE1.All parameters NOT specially mentioned are measured at 220VAC input,rated laod and 25oC of ambient temperature.
2.Ripple&noise are measured at 20MHz of bandwidth by using a12''twisted pair-wire terminated with a 0.1uf &10uf parallel capacitor.
3.Tolerance:includes set up tolerance,line regulation and load regulation.

Rotary Dimmer For LED Lamps 400VA