Wall Mounted Dimmer Switch for Z-Wave Network
- Nov 30, 2017 -

Basic Info

  • Model NO.: ZW31

  • Feature: Mechanical

  • Principle: Resistive

  • Type: Normal Open

  • Structure: Power Built-in Type

  • Kind: Single-pole on-off Switch

  • Detection Method: Reflection Type

  • Z-Wave Frequency: 908.42MHz

  • Voltage: 120 VAC /Dimmer 500W

  • Transport Package: Neutral Packing

  • Origin: Dongguan China

  • Protection: Explosion-Proof

  • Wiring: Null Line and Live Line

  • Application: Home Appliance, Electronics, Lighting, Apartment/Villa, Hotel, Commercial, Home

  • Number of Switch: Single Control Switch

  • Usage: Control Button, Reset Button, Control Switch

  • Contact Type: Type c Contact

  • Certification: SGS, UL, FCC, RoHS

  • Range: Mini 30m Line of Sight

  • Trademark: EVA LOGIK

  • Specification: 115(L)*70(W)*44(H)mm

  • HS Code: 8536500000

Product Description

ZW31  Wall Mounted Dimmer Switch           
Technical data Installation        
The Wall Mounted Switch is a component of the lighting control system. Wire the Wall Mounted Switch in place of a standard wall switch. Inclusion of this Switch allows remote ON/OFF control of loads connected. This Wall Mounted Switch is designed to work with other
Z-Wave enabled devices. Z-Wave nodes of other types can be added to the system and will also act as repeaters.
Technical data 

Operating Voltage120Vac/60Hz
Maximum LoadResistive :on/off 15 amps (1800 watts) maximum 120 VAC /DIMMER 500W
RangeMin 30m line of sight
Relay15A (ON/OFF)
Net weight130g
Frequency 908.42MHz

1. Before installation ensure that the voltage supply is disconnected.
2. Connect switch module as shown on above diagram.
3. Connect the device in accordance with the wiring diagram presented in Wiring diagram. Switch on 120V of the mains voltage.
4. For "Add" in a network: Put the Z-wave interface  controller into "Add" mode, and following its instruction to add the device to your controller. To get in the "Add" mode, the distance between wall-mounted switch and controller is suggested to be in one meter. Quickly pressing the learn switch of ZW30/31 three times for 1 second at least & release to be included.
5. For "Remove" from a network: set up the Z-wave interface controller into "Remove" mode, and following its instruction to delete the ZW30/31 from your controller. Press the learn switch of ZW30/31 three times for 1 second at least &release to be excluded.

Safety and maintenance instruction
-       Make sure that all electric connections and connection cables meet the pertaining regulations and are in conformity with the operating instruction.
-       Do not overload electrical outlets or extension cords, fire or electric shocks can be the result.
-       Please contact an expert in case you have any doubts about the mode of operation, the safety or connecting the appliances.
-       Keep all parts away from young children's reach.
-       Do not store this item on wet, very cold or warm places, this can damage the electronic circuit boards.
-       Avoid dropping or shocks, this can damage the electronic boards.
-       Never replace damaged power cables yourself! In such case, remove them from the net and take the devices to a workshop.
-      Wireless system are subject to interference from cordless phones, microwaves, and other wireless devices during installation and operation.