Technical Data
Denmark AC 220~240V 50Hz Fuga Trailing edge Z-Wave Led Dimmer Switch (Led Dimmer) for led lights, Denmark Dimmer Switch
Model No. | D081-ZV |
Description | Z-Wave Led Dimmer Switch |
Input Voltage | 220-240V |
Input Frequency | 50Hz |
Load | LED | 250VA |
Incandescent | 250W |
Halogen | 250W |
Dimming Mode | Trailing edge(R,C) |
Control Way | multiway |
Material | | PC |
Color | White |
Weight(g) | 45 |
Dimension(mm) | 45.1*45.1*22 |
Certification | CE |
Product DescriptionThe Led Dimmer controller is a switch multilevel device based on Z-Wave Plus and it be easy configuration, operation and can make the traditional LED dimmable lighting to be intelligent control. This Led Dimmer integrated Z-Wave communication module to connect with Z-Wave gateway.
The Led Dimmer controller can be included and operated in any Z-Wave network with other Z-Wave certified devices from other manufacturers. All non-battery operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
The Led Dimmer controller is a security enable Z-Wave Plus product (S0, S2) that is able to use encrypted Z-Wave Plus messages to communi- cate to other security enable Z-Wave Plus products. so a security enabled controller is needed for take full advantage of all functionally. It also supports the Over The Air (OTA) feature for the product’s firmware upgrade.
If you want your Led Dimmer controller to be a security device that use secure/encrypted message to communicate in a Z-Wave network, then a security enabled Z-Wave controller is needed.