Technical Data
EU 220~240V Trailing edge Plug In Dimmer Switch Z-Wave Plus 500 controller for Led lamps
Z-Wave Dimmer Switch Can be controlled by a universal 220V-240V input single wire push switch.
| Model No. | D080-ZV | |
| Description | Plug in Z-Wave Led Dimmer Switch | |
| Input Voltage | 220-240V | |
| Input Frequency | 50Hz | |
| Load | LED | 100VA |
| Incandescent | 200W | |
| Halogen | 200W | |
| Dimming Mode | Trailing edge(R,C) | |
| Control Way | One way | |
| Material | PC | |
| Color | White | |
| Weight(g) | 104.68 | |
| Dimension(mm) | 108.8*54.8*87.2 | |
| Certification | CE | |
Product Description
The Dimmer controller is a switch multilevel device based on Z-Wave enhanced 232 slave library of V6.81.03, and it can be easy configuration, operate, and can make traditional LED dimmable lighting to be intelligent control.
This Dimmer integrated Z-Wave communication module to connect with the Z-Wave gateway.
The Dimmer controller can be included and operated in any Z-Wave network with other Z-wave certified devices from other manufacturers. All non-battery-operated nodes within the network will act as repeaters regardless of vendor to increase the reliability of the network.
Meanwhile this controller is a security-enabled Z-Wave Plus Product (S0, S2) that is able to use encrypted Z-wave plus messages to communicate to other security enable Z-Wave Plus products which means a security-enabled controller is needed for taking full advantage of all functionality. lt also supports the OVER THE AIR(OTA) feature for the product’s firmware upgrade.
If require the dimmer controller to be a security device that uses secure/encrypted messages to communicate in a
Z-Wave network, then a security-enabled Z-Wave controller is needed.
Send Message
Related Products
